| meta | content | tags | dates | categories | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ipam ip-address-manager private-ip-address ip-address ip filter reserve-ip-address |
|
|
IP Address Manager (IPAM) is Scaleway's tool for planning, tracking and managing the IP address space of Scaleway products. It acts as a single source of truth for the IP addresses of Scaleway resources.
Read more about IPAM and future planned functionality.
You can currently use IPAM in the Scaleway console to manage the IP address space of your Scaleway Private Networks. This document shows you how to list the private IP addresses of all your Scaleway resources attached to Private Networks.
- A Scaleway account logged into the console
- Owner status or IAM permissions allowing you to perform actions in the intended Organization
- At least one resource attached to a Private Network.
-
Click IPAM in the Network section of the Scaleway console side menu.
A list of your private IP addresses for the region and VPC pre-selected in the filters displays. Addresses are displayed here if they are reserved in IPAM. This means either:
- You manually reserved an address via IPAM (currently only possible via the IPAM API), or
- You attached a resource to a Private Network: this triggers IPAM to reserve and attach an IP address for the resource on the network.
The full range of IP addresses which are available but unreserved in each of your Private Network's CIDR blocks do not display in the list.
When viewing a private IP address in IPAM, it is shown in [CIDR notation](https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing#CIDR_notation). For example, the address `172.16.12.2/22` represents the IPv4 address `172.16.12.2`and its associated CIDR block `172.16.12.0/22`, defined on the [Private Network](/vpc/how-to/create-private-network/#how-to-configure-cidr) and containing 1024 addresses. -
Modify the filters of the list using the drop-down menus at the top. You can filter for IP addresses within a given region, VPC and/or Private Network. You can also opt to filter for only IPv4 or IPv6 addresses:
-
Click Apply filters to activate the filters you chose, or Reset to reset all filters.