Document UNO R4 WiFi-specific fix for "No device found on ..." upload error
#258
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
… error When an UNO R4 WiFi board is running a sketch that uses the HID capabilities, the port address changes during the upload. Since this change does not occur under other conditions, the platform is not configured to handle such a change. This causes uploads via the standard procedure to fail under these conditions: No device found on <port> This error can occur under other conditions and with other boards, so there is already an entry for it in the Help Center. However, the documented fixes are not applicable to the error as it occurs under these special conditions. There is a reliable fix for the error specific to the UNO R4 WiFi, which was not previously documented in the article.
|
Thank you Per. Sharing this information with the CX team as well. |
6 tasks
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
When an UNO R4 WiFi board is running a sketch that uses the HID capabilities, the port address changes during the upload. Since this change does not occur under other conditions, the platform is not configured to handle such a change. This causes uploads via the standard procedure to fail under these conditions (arduino/ArduinoCore-renesas#73):
This error can occur under other conditions and with other boards, so there is already an entry for it in the Help Center. However, the documented fixes are not applicable to the error as it occurs under these special conditions.
There is a reliable fix for the error specific to the UNO R4 WiFi, which was not previously documented in the article. The addition of that fix to the article is proposed by this pull request.
Related