user guide, definition listings of site params: add 'params' context

userguide/content/en/docs/adding-content/content.md

@@ -614,17 +614,20 @@ Hugo will, by default, create an RSS feed for the home page and any section. For
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 rss_sections = ["blog"]
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-rss_sections:
-  - blog
+params:
+  rss_sections: [blog]
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
 {
-  "rss_sections": [
-    "blog"
-  ]
+  "params": {
+    "rss_sections": [
+      "blog"
+      ]
+  }
 }
 {{< /tab >}}
 {{< /tabpane >}}
@@ -634,17 +637,20 @@ To disable all RSS feeds, add the following to your `hugo.toml`/`hugo.yaml`/`hug
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 disableKinds = ["RSS"]
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-disableKinds:
-  - RSS
+params:
+  disableKinds: [RSS]
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
 {
-  "disableKinds": [
-    "RSS"
-  ]
+  "params": {
+    "disableKinds": [
+      "RSS"
+      ]
+  }
 }
 {{< /tab >}}
 {{< /tabpane >}}

userguide/content/en/docs/adding-content/iconsimages.md

@@ -11,20 +11,28 @@ By default, Docsy shows a site logo at the start of the navbar, that is, at the
 extreme left. Place your project's SVG logo in `assets/icons/logo.svg`. This
 overrides the default Docsy logo in the theme.
 
-If you don't want a logo to appear in the navbar, then set `navbar_logo` to
-`false` in your project's config:
+If you don't want a logo to appear in the navbar, then set site parameter `navbar_logo`
+to `false` in your project's config:
 
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params.ui]
 navbar_logo = false
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-navbar_logo: false
+params:
+  ui:
+    navbar_logo: false
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
+
 {
-  "navbar_logo": false
+  "params": {
+    "ui": {
+      "navbar_logo": false
+    }
+  }
 }
 {{< /tab >}}
 {{< /tabpane >}}

userguide/content/en/docs/adding-content/lookandfeel.md

@@ -158,14 +158,20 @@ Optionally, you can enable Prism syntax highlighting in your `hugo.toml`/`hugo.y
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 # Enable syntax highlighting and copy buttons on code blocks with Prism
 prism_syntax_highlighting = true
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-prism_syntax_highlighting: true
+params:
+  prism_syntax_highlighting: true
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
-"prism_syntax_highlighting": true
+{
+  "params": {
+    "prism_syntax_highlighting": true
+  }
+}
 {{< /tab >}}
 {{< /tabpane >}}
 

userguide/content/en/docs/adding-content/repository-links.md

@@ -18,7 +18,7 @@ Currently, Docsy supports only GitHub repository links "out of the box". Since G
 
 ## Link configuration
 
-There are four variables you can configure in `hugo.toml`/`hugo.yaml`/`hugo.json` to set up links, as well as one in your page metadata.
+There are four site variables you can configure in `hugo.toml`/`hugo.yaml`/`hugo.json` to set up links, as well as one in your page metadata.
 
 ### `github_repo`
 
@@ -27,14 +27,18 @@ The URL for your site's source repository. This is used to generate the **Edit t
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 github_repo = "https://github.com/google/docsy"
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-github_repo: 'https://github.com/google/docsy'
+params:
+  github_repo: https://github.com/google/docsy
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
 {
-  "github_repo": "https://github.com/google/docsy"
+  "params": {
+    "github_repo": "https://github.com/google/docsy"
+  }
 }
 {{< /tab >}}
 {{< /tabpane >}}
@@ -46,14 +50,18 @@ Specify a value here if your content directory is not in your repo's root direct
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 github_subdir = "userguide"
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-github_subdir: 'userguide'
+params:
+  github_subdir: userguide
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
 {
-  "github_subdir": "userguide"
+  "params": {
+    "github_subdir": "userguide"
+  }
 }
 {{< /tab >}}
 {{< /tabpane >}}
@@ -65,14 +73,18 @@ Specify a value here if you have a separate project repo and you'd like your use
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 github_project_repo = "https://github.com/google/docsy"
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-github_project_repo: 'https://github.com/google/docsy'
+params:
+  github_project_repo: https://github.com/google/docsy
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
 {
-  "github_project_repo": "https://github.com/google/docsy"
+  "params": {
+    "github_project_repo": "https://github.com/google/docsy"
+  }
 }
 {{< /tab >}}
 {{< /tabpane >}}
@@ -84,14 +96,18 @@ Specify a value here if you have would like to reference a different branch for
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 github_branch = "release"
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-github_branch: 'release'
+params:
+  github_branch: release
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
 {
-  "github_branch": "release"
+  "params": {
+    "github_branch": "release"
+  }
 }
 {{< /tab >}}
 {{< /tabpane >}}

userguide/content/en/docs/adding-content/search.md

@@ -24,18 +24,28 @@ behavior when serving your site.
 
 ## Disabling the sidebar search box
 
-By default, the search box appears in both the top navigation bar and at the top of the sidebar left navigation pane. If you don't want the sidebar search box, set `sidebar_search_disable` to `true` in `hugo.toml`/`hugo.yaml`/`hugo.json`:
+By default, the search box appears in both the top navigation bar and at the top of the sidebar left navigation pane. If you don't want the sidebar search box, set the site parameter `sidebar_search_disable` to `true` in `hugo.toml`/`hugo.yaml`/`hugo.json`:
 
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params.ui]
 sidebar_search_disable = true
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-sidebar_search_disable: true
+params:
+  ui:
+    sidebar_search_disable: true
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
-"sidebar_search_disable": true
+{
+  "params": {
+    "ui": {
+      "sidebar_search_disable": true
+    }
+  }
+}
+
 {{< /tab >}}
 {{< /tabpane >}}
 
@@ -88,14 +98,19 @@ layout: search
     {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
+# Google Custom Search Engine ID. Remove or comment out to disable search.
 gcs_engine_id = "011737558837375720776:fsdu1nryfng"
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-gcs_engine_id: '011737558837375720776:fsdu1nryfng'
+params:
+  gcs_engine_id: 011737558837375720776:fsdu1nryfng
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
 {
-  "gcs_engine_id": "011737558837375720776:fsdu1nryfng"
+  "params": {
+    "gcs_engine_id": "011737558837375720776:fsdu1nryfng"
+  }
 }
 {{< /tab >}}
     {{< /tabpane >}}

userguide/content/en/docs/adding-content/versioning.md

@@ -69,18 +69,24 @@ params:
 Remember to add your current version so that users can navigate back!
 
 The default title for the version drop-down menu is **Releases**. To change the
-title, change the `version_menu` parameter in `hugo.toml`/`hugo.yaml`/`hugo.json`:
+title, change the site parameter `version_menu` in `hugo.toml`/`hugo.yaml`/`hugo.json`:
 
 {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 version_menu = "Releases"
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-version_menu: 'Releases'
+params:
+  version_menu: Releases
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
-"version_menu": "Releases"
+{
+  "params": {
+    "version_menu": "Releases"
+  }
+}
 {{< /tab >}}
 {{< /tabpane >}}
 
@@ -113,50 +119,68 @@ For example, see the archived docs for
 To add the banner to your doc site, make the following changes in your
 `hugo.toml`/`hugo.yaml`/`hugo.json` file:
 
-1. Set the `archived_version` parameter to `true`:
+1. Set the site parameter `archived_version` to `true`:
 
     {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 archived_version = true
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-archived_version: true
+params:
+  archived_version: true
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
-"archived_version": true
+{
+  "params": {
+    "archived_version": true
+  }
+}
 {{< /tab >}}
     {{< /tabpane >}}
 
-1. Set the `version` parameter to the version of the archived doc set. For
+1. Set the site parameter `version` to the version of the archived doc set. For
   example, if the archived docs are for version 0.1:
 
     {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 version = "0.1"
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-version: '0.1'
+params:
+  version: 0.1
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
-"version": "0.1"
+{
+  "params": {
+    "version": "0.1"
+  }
+}
 {{< /tab >}}
     {{< /tabpane >}}
 
-1. Make sure that `url_latest_version` contains the URL of the website that you
+1. Make sure that site parameter `url_latest_version` contains the URL of the website that you
   want to point readers to. In most cases, this should be the URL of the latest
   version of your docs:
 
     {{< tabpane >}}
 {{< tab header="Configuration file:" disabled=true />}}
 {{< tab header="hugo.toml" lang="toml" >}}
+[params]
 url_latest_version = "https://your-latest-doc-site.com"
 {{< /tab >}}
 {{< tab header="hugo.yaml" lang="yaml" >}}
-url_latest_version: 'https://your-latest-doc-site.com'
+params:
+  url_latest_version: https://your-latest-doc-site.com
 {{< /tab >}}
 {{< tab header="hugo.json" lang="json" >}}
-"url_latest_version": "https://your-latest-doc-site.com"
+{
+  "params": {
+    "url_latest_version": "https://your-latest-doc-site.com"
+  }
+}
 {{< /tab >}}
     {{< /tabpane >}}

userguide/content/en/docs/get-started/basic-configuration.md

@@ -43,11 +43,10 @@ By default, the Docsy example site uses its own [Google Custom Search Engine](ht
 
 ```
 # Google Custom Search Engine ID. Remove or comment out to disable search.
-gcs_engine_id = "011737558837375720776:fsdu1nryfng"
+gcs_engine_id = "..."
 ```
 
-To use your own Custom Search Engine, replace the value in the `gcs_engine_id` with the ID of your own search engine. Or [choose another search option](/docs/adding-content/search).
-
+To use your own Custom Search Engine, set `gcs_engine_id` to your search engine ID. For details, see [Configure search with a Google Custom Search Engine](/docs/adding-content/search/#configure-search-with-a-google-custom-search-engine).
 
 ## What's next?